Instruction movies
Step by step
Remove tyre with brace
- Remove the valve parts and push the tyre off the rim. Push valve inside a little.
- Place the TyreSwitch™ with the long lip between tyre and rim.
- Lever off the tyre from the rim.
- Turn the wheel until the brace rests on the mudguard supporter, then turn the wheel further off.
Putting up the tyre with brace
- Pump up the tube a little. Put the tyre in the rim as far as possible.
- Place the TyreSwitch™ with the short lip between tyre and rim.
- Turn the wheel until the brace rests on the mudguard supporter, then turn the wheel further on.
Remove tyre without brace
- Remove the valve parts and push the tyre off the rim. Push valve inside a little.
- Place the TyreSwitch™ with the long lip between tyre and rim.
- Lever off the tyre from the rim.
- Move the wheel and TyreSwitch™ in opposite direction.
Putting up the tyre without brace
- Pump up the tube a little. Put the tyre in the rim as far as possible.
- Place the short lip between tyre and rim.
- Move the wheel and TyreSwitch™ in opposite direction.